PV3907 纺织品刷磨耗试验
1范围：该测试规范描述了用于测试样品和系列监测测试的纺织品的刷磨损的程序。
2要求：根据图纸和/或TL标准
测试过程
测试仪器：旋转磨机（Frank）
样品尺寸：100cm
磨损区域：约50cm
样品曲率：10mm
负载：10N
转数：1000
刷毛高度：16.4mm
刷毛厚度：0.4mm
每束刷毛：48±2
把柄：90x120mm
捆绑间距：8mm
刷毛材料：PA6
行：11
在每1000次旋转之后，刷子应使用压缩空气清洁杂质。
3.1刷子的供应来源
Kullen Gmbh&Co
Am Heibrunnen83
72766 Reutlingen
Telephone +49 (0)7121 142-0
Fax +49 (0)7121 142-260
Abrasion Tester, SCHOPPER type (new model)
This apparatus evaluates and measures resistanceto wear and tear on varieties of textile materials(woven and knitted fabrics, etc.) acc. toDIN 53863, part 2, GME Standard 60345,
GMW Standard 3283, VW/Audi Zentral-Norm PV 3908
Technical Data:
Test surface: 50 cm
Test procedure:Manual and automatic
Preselection counter for the desired revolutions
Automatic change of test direction every 100 revolutions
The bulging height is to be set with a gauge
Electrical:
240 V / 50 cycles alternate
115 V / 60 cycles by changing setting of DC-power
supply unit
Standard Accessories:
1 device for clamping the emery paper
1 setting gauge for the test sample
1 wrench
1 set of loading weights
Calibration certificateCalibration certificate
1.
Spare brush acc. to Standard PV 3907
2. Emery Paper for Abrasion Tester Schopper acc. to VW Standard PV 3908
