欢迎光临
手机网站 | 联系我们:021-32535039 | 加入收藏
  • 当前位置:上海鼎徵仪器仪表设备有限公司 > 产品中心 > 蒸汽喷射试验箱 > BMW AA-0136蒸汽喷射试验箱TLA1

    BMW AA-0136蒸汽喷射试验箱TLA1

    产品型号: TLA1
    • 1-2 台
      ¥800000.00
    • ≧3 台
      ¥500000.00
    所 在 地: 上海嘉定区
    更新日期: 2022-10-28
    详细信息
    蒸汽喷射试验箱 LTA1 Steam Jet Testers LTA1
    WALTER Cleaningsystems developped an interbranch procedure in
    cooperation with Daimler with which the paint adhesion on painted plastic
    components can be tested.
    The most important factor is to apply the exact volume flow with well-defined
    pressures and constant temperature onto the surface.
    A further step of development is the compliance with the DIN ISO 16925
    standard which guarantees a cross-border standardization of the testing
    method.
    Due to our worldwide servicing all units are maintained depending on their
    state of wear and are brought into a technically perfect condition. The
    calibration carried out by a Walter technician and the traceability to general
    standards guarantee a worldwide comparability. We thereby also certify
    nozzles conforming to standards and train the operators in how to carry out
    the tests.
    Due to continuous developments we also fulfil the testing specifications of the
    following manufacturers
    WALTER Cleaningsystems 与戴姆勒公司合作开发了一种测试程序,可以测试
    涂漆塑料部件上的油漆附着力。
    *重要的因素是将具有明确定义的压力和恒定温度的精确体积流量应用于表
    面。
    进一步的发展是符合 DIN ISO 16925 标准,该标准保证了测试方法的跨境标准
    化。
    由于我们的全球服务,所有装置都根据其磨损状态进行维护,并使其处于技术
    上完美的状态。 Walter 技术人员执行的校准以及对一般标准的可追溯性保证
    了全球的可比性。 因此,我们还对符合标准的喷嘴进行认证,并培训操作员如
    何进行测试。
    Frame:
    base frame with 4 guide rollers
    Boiler container with heating 1 x 9,0 kW
    Spraying booth:
    • dimensions wx d x h: 1138 x 730 x 2240 mm
    for 1 x test piece approx. 150 x 300 mm
    • testing angle 90° - 45° - 30°, +/- 2°
    • booth door with inspection glass
    • exhaust Ø 102 mm connection piece
    • discharge with dirt filter
     
    Possible options:
    • horizontal sliding unit
    • Volvo – sweeping action
    • exhaust fan
    • laser pointer
    • flow meter
    • testing equipment for metering in litres
    • nozzle and plug-in nipple according to nonstandard norms
     
    Technical Data: 技术参数
    Flow rate 15 l/min
    P max.
     
    30 – 150 bar adjustable via external pressure
    regulating valve (water via by-pass, thus less delivery
    volume)
    Motor N 6,5 kW
    Voltage 400 V
    Plug CEE 32 amp., 5-pole
    Nozzle distance
     
    0 – 450 mm nozzle with adjusting mechanism in
    2 directions
     
     
    For testing according to the following specifications:
    符合标准
    • DIN EN ISO 16925:2014-06
    • DBL 5416
    • Ford BO 160-04
    • GM 9531
    • Volvo STD 423-0015
    • Volvo
    VCS 1029,54719
    • VW PV 1503
    • BMW AA-0136
    • Renault D 252018
    • PSA D 255376
    • MAN M 3022
    KIA Hyundai MS210-07
    DAF KEUR00824 -848
    NISSAN M0141





     
  • 留言
    标  题: *(必填)
    内  容: *(必填)
    联系人:
    邮  箱:
    手  机:
    固  话:
    *(必填)
    公  司: *(必填)
    地  址: *(必填)