欢迎光临
手机网站|联系我们:021-32535039
上海鼎徵仪器仪表设备有限公司主营:Taber耐磨试验机,马丁代尔摩擦试验机,PV1210盐雾循环试验箱,ATLAS氙灯老化试验机,38DLPLUS超声波测厚仪
站内搜索
联系我们
电  话: 021-32535039
传  真: 021-32535039
手  机: 13472521719
联系人: 谢文清
邮  箱: xiewenqing@shdzyq.com
地  址: 上海市嘉定区德富路1198号803室太湖世家国际大厦
PV3907 纺织品刷磨耗试验SCHOPPER

PV3907 纺织品刷磨耗试验SCHOPPER

 型号:SCHOPPER  加工定制:否  类型:橡胶  
 外形尺寸:550x600x600 mm 重量:90 kg  
产品简介:型号:SCHOPPER ;加工定制:否 ;类型:橡胶 ;外形尺寸:550x600x600 mm;重量:90 kg
上海鼎徵仪器仪表设备有限公司
详细介绍:
PV3907 纺织品刷磨耗试验
1范围:该测试规范描述了用于测试样品和系列监测测试的纺织品的刷磨损的程序。
2要求:根据图纸和/TL标准
  测试过程
测试仪器:旋转磨机(Frank
样品尺寸:100cm²
磨损区域:约50cm²
样品曲率:10mm
负载:10N
转数:1000
刷毛高度:16.4mm
刷毛厚度:0.4mm
每束刷毛:48±2
把柄:90x120mm
捆绑间距:8mm
刷毛材料:PA6
行:11
在每1000次旋转之后,刷子应使用压缩空气清洁杂质。
3.1刷子的供应来源
Kullen  Gmbh&Co
Am Heibrunnen83
72766 Reutlingen

ABRASION TESTER (Design SCHOPPER)
This apparatus evaluates and measures resistance to wear and tear on varieties of textile materials
(woven and knitted fabrics, etc.) according to DIN 53863, Part 2, GME Standard 60345, GMW Standard 3283 and
VW/Audi Zentral-Norm PV 3908.
The ABRASION TESTER described as follows guarantees a testing method that gives the possibility of determining reliably the resistance to wear and tear. This method consists in that the different sectors of a circular sample of the material to be tested, are successively and intermittently, put into contact with and moved across a loaded abrading face, whereby the sample surface is worn by the abrader. The rotary
movement of the test specimen is arranged at definite intervals, so that the sample is tested in two directions.
The clamping head allows of clamping reliably even very thick samples and moreover is so arranged that, by using under similar initial tension. This is of essential importance as the test result depends upon the stretch of the sample. For fixing the sample the clamping head can be taken off the machine and inserted into a special ringspanner which facilitates this operation. The abrader head is balanced by a counterweight. The compression effect for the abrading operation is produced by placing loading weights on the abrader head. Siliciumcarbid-emery paper has proved to be a very convenient abrasive. For fastening, the strip of emery paper is used for
each test in order that the testing conditions may be uniform.
 
 
Technical specification acc. to DIN 53 863:
Test surface: 50 cm²
Emery paper: Siliciumcarbid (1 sheet of paper for each test)
Compression effect: by placing loading weights on the abrader head
Weight/m² of the sample up to 100 1.0 N
100 to 150 2.0 N
150 to 300 5.0 N
above 300 10.0 N
Connection: electric 3-phase A.D. motor, 220/380 V, 50 cps.
Dimension: 550x600x600 mm
Weight: net 60 kg, gross about 90 kg
 
 
版权所有© 上海鼎徵仪器仪表设备有限公司
联系人:谢文清   联系电话:021-32535039   手机:13472521719   传真:021-32535039   联系地址:上海市嘉定区德富路1198号803室太湖世家国际大厦
沪ICP备12035321号   技术支持:谷瀑环保   管理入口